Professional Sellers And Installers Of Swimming Pool Filtration Systems In Kenya

0 0
Read Time:4 Minute, 15 Second

Filtration is one of the most critical elements of your circulation system in your swimming pool or spa. A pool with sparkling clear water doesn’t happen by accident; it’s the result of careful planning before the build and investing in a high quality system that suits your pool.

Proper swimming pool filtration leads to clean, clear, sanitary water. Improper filtration can lead to cloudy water, along with an unhealthy and potentially dangerous aquatic environment.

Swimming pool sanitation system is an important requirement for any pool owner. It is performed to ensure the quality of water as well as to help users from contracting any infectious waterborne diseases. Today, there are various pool sanitation systems available in the market and most swimming pool owners are confused about their options.

Among them are several chemical and non-chemical options. Chlorine has been one of the most popular disinfectants used for sanitization. Although it is proven to kill harmful pathogens, there is a growing concern of how prolonged exposure can be harmful pool users.

This is why healthier alternatives to chlorine for swimming pools have gained demand in the recent years. Tassmatt Agency Limited contact 0726-410068 is one of the leading providers of healthy swimming pool sanitation systems in the Kenya. The company has been helping its clients transition to chlorine-free pools saving them time and money without the use of algaecides, chlorine, cyanuric acid, and other pool maintenance chemicals.

Basic methods of filtration available today, along with a few pros and cons of each, in order to help you better understand your own pool.

Sand Filter – For commercial pools, sand filters are the oldest and most commonly used form of filtration. Water filters through a granular media, typically a fine, high grade silica or a combination of coarser sand and gravel. Alternative media, such as crushed glass, can also be an option. Sand filters are cleaned via backwash, the process of reversing water flow through the filter and carrying collected debris to waste. Additional chemical cleaning is necessary from time to time and sand replacement can be necessary every few years. Sand filters, depending on the type, filter out down to a particle size of 25-50 microns. (A human hair is approximately 70 microns; bacteria typically measure around 1 micron.)

Cartridge Filter – Cartridge filters are great for smaller bodies of water, such as spas. Cartridges are cylindrical arrangements of accordion pleated polyester or paper. Benefits of cartridge filters include a smaller footprint, more effective filtration, and ease of cleaning/replacement. Cartridge filters can not be backwashed, due to their construction. Instead, the elements are removed from the filter housing, replaced with clean elements, and then cleaned using a liquid filter cleaner and hose. Their downside is that they should not be installed on high flow/large volume bodies of water. Some could consider the cleaning process a downside. Cartridge filtration is accepted to be in the 10-25 micron range.

DE Filter – The most effective filtration option, DE filters require a large footprint in the pump room, due to being submerged in a water tank, and therefor are not nearly as common as sand filters. DE – Diatomation Earth – are tiny fossilized skeletons of sea plankton that are coated onto a grid of filter elements. Water can either be pushed or pulled through this system. DE is considered carcinogenic and proper handling and storage techniques, including protective gear and breathing protection, must  be observed. DE filters are able to be backwashed for cleaning, but DE is lost in the process and needs to be periodically replaced. A range of 2-6 microns is generally the filtration measurement of a DE filter.

Regenerative Filter – A relative newcomer to the market, regenerative filters utilize DE or a synthetic substitute. In a traditional DE filter, only the channels and depressions of the surface of the filter media trap particulate. The underside of the DE, the side attached to the grid, has a reduced ability to filter. In a regenerative filter, the media is held on multiple tubes, or “fingers”, that are periodically “bumped”, causing the filter media to fall to the bottom of the tank. The filter media is then redistributed, allowing unused sides of the media to be used for filtration as well. Regenerative filters offer a large amount of surface area with a relatively small footprint and are often toted for their water saving qualities, due to the reduced need for backwashing and DE replacement. The water savings may or may not offset the cost of these units, therefore your individual return on investment should be evaluated before purchase.

I have not gone into dept about alternative filter media options, additions, and techniques, of which there are many. Those are best researched on a case by case basis for your facility. The above information is given simply to give you a better understanding of the primary types of filtration currently found in commercial pump rooms. Hopefully, if you’re new to the topic, this will give you a good start.

Credit Source: https://www.intec-america.com/pools/swimming-pool-sanitization/

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

tassmattagencies@gmail.com

Learn More →

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published. Required fields are marked *